Allen And Heath Pa 28 User Manual
View online Operation & user’s manual for ALLEN & HEATH ZED 420 Music Mixer or simply click Download button to examine the ALLEN & HEATH ZED 420 guidelines offline on your desktop or laptop computer. Allen & Heath 24 ZED-14, 18 & 24 User Guide. SONAR LE will run automatically after installation, or else click the icon created on the desktop. To initially configure SONAR X1 LE with ZED: Create a normal Cakewalk project (an option offered. When starting SONAR). In Edit/Preferences configure the I/O—enable the USB Audio CODEC under Devices.
6
Allen & heath dlive powers hawkwind’s 50th anniversary tour Pioneering space-rockers, Hawkwind are a much-loved British institution with an enduring, devoted fanbase. Allen & heath PA-28 Pdf User Manuals. View online or download Allen & heath PA-28 User Manual.
PA-CP User Guide
Overview
PA Series consoles provide all the tools you need to run a small PA system in an easy ‘walk up and
go’ format. You simply plug in your microphone and line sources and connect to the speakers. All the
control and processing you need to run a small PA system is built into the console.
Two powered models are available. The PA12-CP has 8 mono and 2 dual stereo channels. The
PA20-CP has 16 mono and 2 dual stereo channels. Both are portable and include protective side
trims and front carry handles. The PA12-CP can be mounted in a standard 19” rack or plinth by
removing its trims and fitting optional rack ears provided.
The two amplifiers can be configured in several different ways according to your PA requirements. For
example, you may run a stereo house system without monitors, or a mono system with additional
musicians monitor speaker, or you may connect to externally powered house speakers and use the
internal amplifiers for two independent monitor speakers. The additional mono line output can be
used, for example, to feed a sub bass amplifier/speaker system or another listening zone.
The power amplifier is without doubt the most critical device in the audio signal path. It converts a
reservoir of power derived from the mains supply into amplified sound. The PA-CP amplifier is a third
generation design that has been rigorously field tested both for absolute reliability and sound quality. It
uses a solid, no-nonsense 1.6kW linear power supply and bi-polar assisted MOSFET Class AB
amplifier design. The unique Allen & Heath constant power system ensures that all the available power
is converted into useable speaker power so achieving the full 500W per side into 4 ohms or 8 ohms.
Full protection is provided including isolating relays, short circuit and over current protection, output
sensing clip limiter, and twin fan thermal management.
We recognise the importance of accurate equalisation both for creative sound processing and for
dealing with problems such as feedback and room resonance. The channel strip features a powerful 4
band EQ with two mids, one with swept frequency. We have chosen to include 4 band semi-
parametric rather than traditional graphic EQ on the amplifier channels. These provide far greater
accuracy and therefore less colouration of the sound. Our ‘EQ Visualiser’ software is available to help
you learn how the parametric controls affect the frequency response.
Years of designing mixers and listening to our customers has resulted in a control surface that presents
a well thought out set of functions including many innovative touches that make the job of mixing a
simple pleasure. Notable features include individual phantom power, space saving dual stereo inputs,
standby and BGM (background music) modes, built-in digital effects processor, lamp connector,
selectable sub filter, recording source selector and even an SPDIF digital output.
The name Allen & Heath is well regarded in the professional audio world. The standards applied to our
top end consoles also apply to the PA Series. High grade circuits and components, 100mm Alps
faders, individual vertical circuit cards with sealed potentiometers nutted to the panel, solid grounding
with internal copper buss and steel chassis construction are just a few of the qualities that put this
powered mixer into a class of its own. Our objective was to provide a truly professional solution for
small system mixing. We hope you enjoy using your PA Series console.
Allen & Heath 24 ZED-14, 18 & 24 User Guide
SONAR LE will run automatically after installation, or else
click the icon created on the desktop.
To initially configure SONAR X1 LE with ZED:
Create a normal Cakewalk project (an option offered
when starting SONAR).
In Edit/Preferences configure the I/O—enable the USB
Audio CODEC under Devices. This is the ZED interface.
For now, disable any other devices listed, for example the
computer’s internal soundcard listed here.
In SONAR X1 LE different views are available. The Track
view shows audio and MIDI tracks in a timeline aspect and
the Console view shows a mixer style layout. Different
views can be displayed by the “dock” tabs at the bottom of
the screen. On the left is the Track Inspector.
Add an audio track or two clicking Insert/Audio Track.
Tracks can be named by clicking the name box, here we
have named tracks 1&2 ZED-Left and ZED Right.
Configure the inputs for the tracks using the IN/OUT
routing drop-down menu in the Track Inspector. Here we
select LEFT USB Audio to track 1 and RIGHT USB Audio
to track 2. The track outputs are routed to the Master bus
in SONAR.
Select the output for the Master bus in SONAR by clicking
the drop-down arrow in the Inspector and selecting
STEREO USB Audio CODEC which is the ZED USB re-
turn.
In order to check the configuration, enable Input Echo On
(the top right button in the track view header). Play some
audio through your ZED mixer and select the USB send
buttons to the audio signal (for example the L-R mix).
N.B. Do not route the USB return to the L-R mix in your
ZED mixer at this stage—a feedback loop could occur.
You should see the signal on the metering in SONAR LE.
To try a recording, enable the Record buttons on the
tracks and click the main Record button on the transport
toolbar. Recorded audio signal should be displayed in red.
Click stop, or hit the space bar on your keyboard to stop
the recording.
Once you have recorded audio in your SONAR project
you can play it back to the ZED mixer.
De-select the record arm buttons and Input Echo on the
tracks (or you could get both the recorded track signal
Connect power splitter cable. Creative Worldwide Support Audigy 2 ZSTurn off your computer and all peripheral devices before removing the computer cover. Audigy 2 zs notebook user manual pdf. Installing The AutoPlay feature in your Windows system may not be enabled.
AND the live input signal playing, and possibly a feedback
loop).
Press play or hit the spacebar on the keyboard. You should
see the audio being played and levels on the meters in SO-
NAR.
On your ZED mixer, Press USB Rtn ON and turn the level
up to the desired point. Audio should be playing from the
tracks in SONAR to the L-R bus in your ZED.