Ocean Optics Red Tide Uv-vis Spectrometer User Manual
- Ocean Optics Red Tide Uv-vis Spectrometer User Manual 2016
- Uv-vis Spectrophotometer
- Ocean Optics Red Tide Uv-vis Spectrometer User Manual Pdf
- Uv Vis Spectrometer Instrument
In this Spectrometer System the SPARK Science Learning System or a computer running SPARKvue software controls the Ocean Optics Red Tide Spectrometer which detects the spectrum through a fiber optics cable using a 2048 pixel CCD linear array. You can quickly display 2048 wavelengths as intensity, absorbance, transmittance, or relative irradiance. The Cool Red is a silicon nitride light source, with output from 1 to 5 μm, and a shutter capable of rapid modulation. And is compatible with a preconfigured UV-VIS or VIS-NIR spectrometer and any light source (provided the probe fiber matches the wavelength range of the light source). An Ocean Optics spectrometer is an ideal tool for. Ocean Optics Red Tide USB650 Install User Manual. Installing the red tide, Overview, Red tide installation. Ocean Optics Equipment. Manuals Directory ManualsDir.com - online owner manuals library. The USB port on a computer can power up to five Red Tide spectrometer channels. We no longer carry this product. Please consider the Vernier UV-VIS Spectrophotometer. The Red Tide UV-VIS range spectrometer connects directly to your computer with a standard USB cable. It is a fully functioning spectrophotometer that gives precise measurements instantly over a range of 200–850. The USB650 Red Tide from Ocean Optics is a low-cost, small-footprint spectrometer that is perfect for teaching laboratories as well as the classroom. This preconfigured, off-the-shelf spectrometer can be used with various Ocean Optics accessories, light sources and sampling optics to create application.
- Red Tide Spectrometers, USB-650, Ocean Optics Inc Spectrophotometers and Spectrometers UV/Visible Spectrophotometers The Ocean Optics Red Tide educational spectrometer couples a low-cost, high-performance 2048-element linear CCD-array detector with an optical bench that’s small enough to fit into the palm of your hand.
- Ocean Optics USB2000+ UV-VIS Spectrometer 200-850 nm. Make Offer - Ocean Optics Pasco Scientific Red Tide USB650 Spectrometer. User Agreement.
170-00000-RT-02-1109
Ocean Optics Red Tide Uv-vis Spectrometer User Manual 2016
1
Chapter 1
Introduction
Product Overview
The Ocean Optics Red Tide Spectrometer is a preconfigured, off-the-shelf spectrometer where all of the
optical bench options such as grating, and entrance slit size are already selected. The red Tide can be used
with various Ocean optics spectrometer accessories, light sources and sampling optics to create
application-specific systems for various absorbance, reflection and emission applications.
The Red Tide is low-cost and has a small footprint, making it ideal as a general purpose instrument for
budget-conscious teaching and research labs. It has a wavelength range of 350–1000 nm and uses a
detector with 650 active pixels; that’s 650 data points in one full spectrum, or one data point per
nanometer.
Data programmed into a memory chip on each Red Tide includes wavelength calibration coefficients,
linearity coefficients, and the serial number unique to each spectrometer. Our spectrometer operating
software simply reads these values from the spectrometer — a feature that enables hot swapping of
spectrometers among computers.
The Red Tide Spectrometer connects to a computer via the USB port. When connected through a USB 2.0
or 1.1, the spectrometer draws power from the host computer, eliminating the need for an external power
supply. The Red Tide also interfaces to Pasco’s Xplorer GLX, a unique combination of datalogger and lab
analysis tool that eliminates the need for a computer.
The Red Tide, like all USB devices, can be controlled by our SpectraSuite software, a completely
modular, Java-based spectroscopy software platform that operates on Windows, Macintosh and Linux
operating systems.
Ocean Optics Red Tide Fiber Optic Spectrometer
3: Troubleshooting
10
170-00000-RT-02-1109
NoteDenon avr x2000 user manual pdf.
Improperly installed USB devices can also appear under the Universal Serial Bus
Controller option. Be sure to check this location if you cannot locate the unknown device.
3. Locate the unknown device (marked with a large question mark). Right-click on the Unknown
Device listing and select the Uninstall or Remove option.
4. Click the OK button to continue. A warning box appears confirming the removal of the Unknown
Device. Click the OK button to confirm the device removal.
5. Disconnect the Red Tide from your computer.
6. Locate the section in this chapter that is appropriate to your operating system and perform the
steps in the following
Remove Improperly Installed Files
section.
Remove Improperly Installed Files
►
Procedure
1. Open Windows Explorer.
2. Navigate to the Windows INF directory.
Note
Uv-vis Spectrophotometer
If the INF directory is not visible, you must disable the Hide System Files and Folders
and Hide File Extensions for Known File Types options in Windows Folder Options.
Access Windows Folder Options from Windows Explorer, under the Tools Folder
Options menu selection.
3. Delete the OOI_USB.INF in the INF directory. If your computer is running either the Windows
2000 or XP operating system, you must also delete the OOI_USB.PNF file in the INF directory.
4. Navigate to the Windows System32 Drivers directory.
5. Delete the EZUSB.SYS file.
6. Reinstall your Ocean Optics application and reboot the system when prompted.
7. Plug in the USB device.
The system is now able to locate and install the correct drivers for the USB device.
Mac Operating Systems
Since there are no device files for the Red Tide Spectrometer in a Mac operating system, you should not
encounter any problems if you installed the spectrometer before the SpectraSuite software.
Ocean Optics Red Tide Uv-vis Spectrometer User Manual Pdf
